- 08-10PP Melt Blown Filter Cartridg
- 15-09Liquid Filter Bags
- 15-09Glass Fiber Membrane Pleated
- 15-09PP Membrane Pleated Filter Ca
- 15-09String Wound Filter Cartridge
- 15-09Absolute Rate Melt Blown Filt
- 15-09Carbon Block Filter Cartridge
- 15-09High Flow Rate Pleated Filter
- 15-09Silver Sentinel Filters
- 15-09String Wound Carbon Compound
Absolute Rate Melt Blown Filter Cartridges
Absolute Rate Melt Blown Filter Cartridges
Description
Hongtek Absolute Rate PP Melt Blown Filter Cartridges are constructed by high technology design that take advantage of flow pattern progressively from surface to inner center. It has significant service life when consistent high filtration efficiency. Manufactured with progressively graded density,the absolute rate of this filter could get to 99.9% and has supernormal dirt holding capacity.
Feature
1, 99.9% filtering efficiency (Beta Ratio: 1000) and exactly precision from 1um to 100 um
2, Exceptional compressive capacity
2, Depth layers strucure ,high contaminant holding capacity and longer filter service life .
3, Made of FDA grade PP material which is environmental protection ,without binders,additives and lubricants .
4, High filtration efficiency,consistent filtration performance
5,Good Chemical compatibility
Application
1,Water treatment 2, PCB industry 3,Pre RO/ID water filtration
4,Chenmicals ,solvents 5,Plating solution 6,Electronic Industry
7,Petrochemical Process 8,Filtering for Food & Beverage
Specification
|
Filter Media |
Polypropylene |
|
Length |
5",9.75"9.8",10",20",30",40",50" ,60" |
|
Micron Rating |
1, 5, 10, 20,30, 50, 75, 100 μm |
|
Inside Diameter |
1.1"(28mm) |
|
Outside Diameter |
2.5"(63mm) |
|
Core |
PP |
|
Gasket/O-ring |
Silicone, EPDM, Viton, Teflon encapsulated Viton |
|
End Cap |
Flat ,222 O-Ring,226 O-Ring,Fin |
Operation Data
|
Max. Operating Temperature |
60 ℃(140℉) |
|
Max. Differential Pressure |
4.0 bar at 20℃ (58 psi at 68℉) |
|
Recommended Change Out Differential Pressure : |
2.0 bar (29 psi) |
Order Information
Normal type : HTAPP-N-Rating-Length
|
HTAPP |
Core |
Rating |
Length |
End Cap Type |
Seal material |
|
Hongtek Absolute PP Melt Blown Filter |
W:With Core |
01:1μm |
5: 5" |
Ⅰ-222/Flat end |
V:Viton |
|
N:Without Core |
05:5μm |
9.75:9.75" |
Ⅱ-222/Fin |
S: Silicon |
|
|
|
010:10μm |
9.8:9.8" |
Ⅲ-226/Flat end |
E:EPDM |
|
|
|
020:20μm |
10:10" |
Ⅳ-226/Fin |
B:NBR |
|
|
|
030:30μm |
20:20" |
|
|
|
|
|
050:50μm |
30:30" |
|
|
|
|
|
075:75μm |
40:40" |
|
|
|
|
|
100:100μm |
50:50" |
|
|
|
|
|
|
60: 60" |
|
|
|
|
Other Customized Sizes |
|
|
|||
For Example:
HTAPP-N--01-10-Ⅰ-S
PP, Rating:1μm ,Core:Without Core,Length:10",End Cap:222/Flat end, Seal:Silicon
Download