- 08-10PP Melt Blown Filter Cartridg
- 15-09Liquid Filter Bags
- 15-09Glass Fiber Membrane Pleated
- 15-09PP Membrane Pleated Filter Ca
- 15-09String Wound Filter Cartridge
- 15-09Absolute Rate Melt Blown Filt
- 15-09Carbon Block Filter Cartridge
- 15-09High Flow Rate Pleated Filter
- 15-09Silver Sentinel Filters
- 15-09String Wound Carbon Compound
Carbon Block Filter Cartridges
Carbon Block Filter Cartridges
Description
Carbon Block Filter Cartridges are made of activated carbon block which is manufactured by strictly sintered and extruded controlled engineering processes,techniques and material of the highest quality guarantee excellent durability, minimal pressure loss and high filtration rate.It is highly effective in removing odour, bad taste , chlorine spores and microorganisms in liquid. Carbon cartridge provide economic solutions for a wide range of residential, commercial and industrial water filtration processes.
Feature
1, Excellent absorbency ,no release of carbon fines
2, Effectively wipe off chlorine, bad taste, odour and other impurities of dissolved organics.
3, Extended dirt holding capacity,low pressure drop and good filtering effect
4, Wide application in liquid filtration field
5, High chemical compatible ability
Application
1, Drinking Water 2, Pre RO/DI filtration 3, Food & Beverages
4, Electronics 5, Waste Water Treatment 6, Petrochemical
7, Plating Processes 8, Chemicals 9, PCB industry
Specifications
|
Filter Media |
Coal Based Activated Carbon Block/Coconut Shell |
|
Long size |
5",9.75",9.8"10",20",30",40" |
|
Micron Rating |
5μm,10μm |
|
ID |
28mm, 30mm |
|
OD |
61mm,65mm |
|
End Cap |
PP |
|
Gasket |
Silicone,Buna-N,EPDM |
|
Netting |
Polythene |
Operation Data
|
Max. Operating Temperature |
80℃(176℉) |
|
Max. Differential Pressure |
7.0 bar at 25℃ (100 psi at 77℉) |
|
Max.Operation Pressure |
17 bar |
|
Recommended Change Out Differential Pressure : |
2.1 bar (31 psi) |
|
Max.Flowrate |
5 L/min ( water，△P＝0.15kgf/cm2，10 filter) |
Technical Index
|
Ratio for surface area |
800 - 1000 m²/g |
|
Adsorption for iodine |
900-1000mg/g |
|
Adsorption for Benzene |
20-25% |
|
Adsorption for carbon tetrachloride |
50-60% |
|
Adsorption for Methylene Bule |
13-16ml/g |
|
Ash content : |
≤3.5 |
Removability to multifarious impurities
|
Remaining chloride |
Chemical oxygen demand |
Total iron |
Oxide |
Mercury |
As |
Cyanide |
Phenol |
Sixivalency |
|
93.83% |
43.21% |
91.88% |
67.32% |
79.43% |
38.51% |
99.98% |
78.85% |
8.77% |
Average Adsorption to poison substance for 10" carbon block filter
|
Benzne |
Toluene |
Methanol |
Ethoxy |
Chloroform |
Acetone |
Styrene |
Hyaarogen sulphide |
N-butyl sulfhydrate |
|
68g |
81g |
69g |
91g |
120g |
72g |
60g |
125g |
171g |
Order Information
|
HTCB |
Filter Material |
ID |
OD |
Rating |
Length |
Gasket |
|
Hongtek Carbon Block Filter |
A: Coal |
C:28mm |
E:61mm |
05:5μm |
5:5" |
S:Silicone |
|
B: Coconut Shell |
D:30mm |
F: 65mm |
010:10μm |
9.75:9.75" |
BN:Buna-N |
|
|
|
|
|
|
9.8:9.8" |
M:EPDM |
|
|
|
|
|
|
10:10" |
|
|
|
Other Customized Sizes |
20:20" |
|
||||
|
30:30" |
|
|||||
|
40:40" |
|
|||||
For Example:
HTCB-A-C-E-05-10-S
Hongtek Carbon Block Filter -Filter Material: Coal-
ID:28mm -OD:61mm-Rating:5μm-Length:10"-Gasket: Silicone
Download