- 15-05Liquid Filter Bags
- 15-05PP Membrane Pleated Filter Ca
- 15-05PP Melt Blown Filter Cartridg
- 15-05Big Bule PP Melt Blown Filter
- 15-05Carbon Impregnated Cellulose
- 15-05Absolute Rate Melt Blown Filt
- 15-05String Wound Filter Cartridge
- 15-05Extra-fiber String Wound Filt
- 15-05Big Bule String Wound Filter
- 15-05Carbon Block Filter Cartridge
Hydrophilic PTFE Membrane Pleated Filter Cartridges
Hydrophilic PTFE Membrane Pleated Filter Cartridges
Description
Hydrophilic PTFE Membrane Filter Cartridges is constructed by high-class hydrophilic polytetrafluoroethylene membrane and superior PP support materials . It provide high flow rate, long service life and low pressure drop due to its high porosity and permeability. The cartridges have great convenience ,easy installation and extensive chemical compatibility.
Feature
1,Stabilized hydrophilia,high filtration efficiency
2, 100% integrity test
3, Broad chemical compatibility and high temperature-resistance
3, Long service life, low pressure ,and thermostability
4, Heat-resisting,consistent excellent performance
Applications
1,Semiconductor 2,Electronic industry 3,Chemicals industry
4,Prefiltration of RO/DI 5,Process Gases 6,Storage Tank Vents
7,Pharmaceutical 8,Food & Beverage 9,Etchants
10,Solvents 11,Photoresists
Specifications
|
Filter Media |
Hydrophilic PTFE |
|
Length |
5",10",20",30",40" |
|
Micron Rating |
0.05, 0.1, 0.2, 0.45, 1 μm |
|
Outside Diameter |
2.75"(70mm) |
|
Core |
Polypropylene/SUS316 |
|
Filter Support |
Polypropylene |
|
Gasket/O-ring |
Silicone, EPDM, Viton, Teflon encapsulated Viton |
|
End Cap/Cage |
Polypropylene |
Operation Data
|
Max. Operating Temperature |
90℃(194℉) |
|
Max. Differential Pressure |
4.8 bar at 20℃(70 psi at 68℉) |
|
Recommended Change Out Differential Pressure : |
2.4 bar (35 psi) |
|
Sterilization Temperature Time |
121˚C (250˚F) for 30 minutes at 1.0 bar (15 psi) |
Order Information
|
HTPTFEM |
Micron Ratings |
Filter Media |
Length |
Gasket/O-ring |
End Cap |
|
Hongtek PTFE Membrane Pleated Filter Cartrdiges |
0.05 :0.05μm |
HP: Hydrophilic PTFE |
5: 5" |
S-Silicone |
A:Flat Gasket Double Open End |
|
0.1:0.1μm |
9.8:9.8" |
E-EPDM |
B:2-222 O-ring with Flat End |
||
|
0.2:0.2μm |
10:10" |
N:NBR |
C:2-226 O-ring with Flat End |
||
|
0.45:0.45μm |
20:20" |
V-Viton |
D:2-222 O-ring with Fin |
||
|
1:1μm |
30:30" |
T-Teflon Encapsulated Viton |
E: 2-226 O-ring with Fin |
||
|
|
35:35" |
|
|
||
|
|
40:40" |
|
|
||
|
|
Other Customized Sizes |
|
|
||
|
|
|
|
|
For Example:
HTPTFEM-0.1-HP-10-S-A
Hongtek Hydrophilic PTFE Membrane Pleated Filter ,Rating:0.1μm ,Filter Media:Hydrophilic PTFE, Length:10",Gasket/O-ring:
Download