- 08-10PP Melt Blown Filter Cartridg
- 15-09Liquid Filter Bags
- 15-09Glass Fiber Membrane Pleated
- 15-09PP Membrane Pleated Filter Ca
- 15-09String Wound Filter Cartridge
- 15-09Absolute Rate Melt Blown Filt
- 15-09Carbon Block Filter Cartridge
- 15-09High Flow Rate Pleated Filter
- 15-09Silver Sentinel Filters
- 15-09String Wound Carbon Compound
PP Membrane Pleated Filter Cartridges
PP Membrane Pleated Filter Cartridges
Description
PP Membrane Pleated Filter Cartridges are constructed by high purity pleated PP melt blown filter media ,provide excellent filtration efficiency and chemical compatibility across a wide range of liquid filtration process applications.
The constitution use thermal welding techniques to seal all components ,so that eliminates extracts and optimizing cartridge integrity. The large surface area ensure long service life and low pressure drops. All parts are assembled in a non-pollution room to refrain from contamination .Membrane filters are widely used for demanding filtration field requiring high purity.
Feature
1, Manufacture in clean room and high cleaning environment
2, Multi-layers structure , absolute efficiency filter and long service life while steady filtration performance
3, End caps ,seals and components are assembled in fully sealed condition by thermal bond, free of binder ,additives and lubricants
4, Low pressure drop and high capacity of impurities
5, Strict election materials which according to FDA standard
Applications
1,Prefiltration for RO/DI 2,Etchants
3,Oil industry 4,Chemicals
5,Cosmetics 6,Medicine Filtering
7,Semiconductor 8,Food & Beverage
9,Plating solution 10,Paints and Coatings
Specifications
|
Filter Media |
Polypropylene |
|
Length |
5",9.8",10",20",30",35",40" |
|
Micron Rating |
0.1,0.22,0.45,0.65,0.8,1, 2,3,5, 10, 20,30,40, 50, 60μm |
|
Outside Diameter |
2.75"(70mm) |
|
Core |
Polypropylene |
|
Filter Support |
Polypropylene |
|
Gasket/O-ring |
Silicone, EPDM, Viton, NBR,Teflon encapsulated Viton |
|
End Cap/Cage |
Polypropylene |
Operation Data
|
Max. Operating Temperature |
80℃(176℉) |
|
Max. Differential Pressure |
4.8 bar at 20℃ (70 psi at 68℉) |
|
Recommended Change Out Differential Pressure : |
2.4 bar (35 psi) |
|
Sterilization Temperature Time |
121˚C (250˚F) for 30 minutes at 1.0 bar (14 psi) |
Order Information
|
HTPPM |
Micron Ratings |
Filter Media |
Length |
Gasket/O-ring |
End Cap |
|
Hongtek PP Membrane Pleated Filter Cartridges |
0.1:0.1μm |
P: Polypropylene |
5: 5" |
S-Silicone |
A:Flat Gasket Double Open End |
|
0.22:0.22μm |
9.8:9.8" |
E-EPDM |
B:2-222 O-ring with Flat End |
||
|
0.45:0.45μm |
10:10" |
N:NBR |
C:2-226 O-ring with Flat End |
||
|
0.65:0.65μm |
20:20" |
V-Viton |
D:2-222 O-ring with Fin |
||
|
0.8:0.8μm |
30:30" |
T-Teflon Encapsulated Viton |
E: 2-226 O-ring with Fin |
||
|
1:1μm |
35:35" |
|
|
||
|
2:2μm |
40:40" |
|
|
||
|
3:3μm |
Other Customized |
|
|
||
|
5:5μm |
|
|
|||
|
10:10μm |
|
|
|||
|
20:20μm |
|
|
|||
|
30:30μm |
|
|
|||
|
40:40μm |
|
|
|||
|
50:50μm |
|
|
|||
|
60:60μm |
|
|
|||
|
|
|
|
|||
|
|
|
|
For Example:
HTPPM-0.1-P-10-S-A
Hongtek PP Membrane Pleated Filter ,Rating:0.1μm ,
Filter Media:PP,Length:10",Gasket/O-ring:Silicone, End Cap:Flat Gasket Double Open End
Download