Home > Hongtek Product >

PF Series Pleated High Flow Filter Cartridges

 

PF Series Pleated High Flow Filter Cartridges are made of polypropylene or glass fiber materials,replacement filter cartridges for the depth filtration and other 2.5" diameter filters for the high flow applications.The water treatment volume for per pleated high flow filter cartridge equals to 10 pcs 40 inch length and 2.5" outer diameter slim filter cartridges,inner O-ring insure no bypass and handle design makes more easier to install.Because for high dirt holding capacity,long service life and wide chemical compatibility,the pleated high flow filter could be used in many applications,such as pre-filtration of RO,power plant water system,paints and others crucial fluid filtration industries.

 

- Pleated high flow filters are easier install and replacement
- The pleated cartridges are high flow rates and low pressure drops
- High flow pleated filters are wide chemical compatibility for different applications
- Pleated high flow cartridge filters have stable good filtration efficiency and long service life
- One high flow filters equals to 10 pcs 40 inch length and 2.5" outer diameter slim filters,save much the labor cost
 


- Petrochemical,refineries
- Food and beverage filtration
- Power plant water treatment

- Paints,inks,magnetic media
- Sea water desalination and RO pre-filtration
- API,solvents,and water filtration in biopharm market

 

Filter Media Polypropylene,Glass Fiber
Length 40" (1016 mm)
Outside Diameter 6 inch (152 mm)
Filtration Rating 1μm,4.5μm,6μm,10μm,20μm,40μm,70μm,100μm
Support/Drainage Polypropylene (PP)
End Cap Material Glass fiber reinforced Polypropylene (PP)
Seal Material EPDM

 

Maximum Operating Temperature 82℃
Maximum Differential Pressure 3.4Bar 82℃
Suggested Maximum Flow Rate

1300 LPM

 

high flow cartridge filters installed

high flow filter installed

- High flow pleated filters have stable structure and reliably sealing
- Long service life and easy to replace, save some costs and spaces
- High flow rate & low delta pressure,filters are designed for high efficiency
- Depth pleated structure,large filtration area and high dirt holding capacity
- Pleated cartridge filters are installed in standard high flow filter housings

 

HTPFPC Material Filtration Rating O-ring Material

Hongtek

PF Series Pleated High Flow Filter Cartridges

PP:PP 1:1μm E:EPDM
GF: Glass Fiber 4.5:4.5μm  
  6:6μm  
  10:10μm  
  20:20μm  
  40:40μm  
  70:70μm  
  100:100μm  

For Example:

HTPFPC-PP-1-E

PF Series Pleated High Flow Filter Cartridges -Material:PP- Filtration Rating: 1μm - O-ring Material:EPDM

 

Pdf document viewing Download