Home About HongtekFiltration ProductsApplicationsSupportNewsContact Us
Home >> Filtration Products >> Liquid Filtration >> Melt Blown Filter Cartridges >> CPP Series PP Spun Bonded Filter Cartridges with Furry Surface
CPP Series PP Spun Bonded Filter Cartridges with Furry SurfaceCPP Series PP Spun Bonded Filter Cartridges with Furry SurfaceCPP Series PP Spun Bonded Filter Cartridges with Furry Surface

CPP Series PP Spun Bonded Filter Cartridges with Furry Surface

Description

On the basis of normal PP spun bonded filter cartridges, Hongtek developed a new type CPP Series PP Spun Bonded Filter Cartridges with Cottony Surface, which adopted advanced thermally bonded techniques to meet customers' requirements. PP spun bonded cartridges are manufactured of 100% FDA approved polypropylene, without surfactants, binders and adhesives. With hairy surface treatment, spun bonded cartridges have larger dirt holding capability and strong anti-pressure ability. PP spun bonded filter cartridges have consistent performance with a 99.9%(Beta 1000) efficiency rating during long service life and are widely used for many important industrial filtration applications.

Specification
Filter MediaPolypropylene
Filter SurfaceCottony treatment
Length5", 9.75", 9.8", 10", 20", 30", 40", 50"
Inside Diameter28mm, 30mm
Outside Diameter2.5"(63mm), 2.55"(65mm)
Filtration Rating1μm, 5μm, 10μm, 25μm, 50μm, 75μm, 100μm
Gasket/O-ringSilicone, EPDM, Viton, Buna
End CapDOE, 222/Flat(SOE), 222/Fin(SOE), 226/Flat(SOE), 226/Fin(SOE)


Feature

● Spun bonded filtration fiber without any binders and adhesives

● Low initial pressure drop, high flow rate and good filtration efficiency

● 100% FDA approved polypropylene for compatibility with a wide range of processing fluids

● Consistent & high filtration efficiency, more stable structure and stronger anti-pressure ability

● Available length up to 50 inches with end caps, such as 222/fin, 226/fin, gaskets, closed caps etc.

● Spun-bonded-cartridges design provides high contaminant holding capability and long service life



Application
Oil & GasAmmine filtration, Completion fluids, deep well injection, acrylates
Inks and CoatingsIndustrial coatings, lacquers, solvents, water, paint, clear coat, inks, automotive coatings
Chemical ProcessingAcrylates, alcohols, bleach, alkalis, acids, Bulk chemical filtration, make-up water, sodium hypochlorite
ElectronicsSemiconductors, PCB industry, photoresists, DI water, chemicals, bulk chemical pre-filtration, pre-RO micron filtration
Water TreatmentCooling towers, cooling water, Process water pre-filtration, power plant water treatment, sea water desalination
Metal FinishingStripping solutions, anodizing, hydraulic press oil, machine coolants, aqueous parts washing, plating solutions and chemicals


Performance

Operation Data for PP Spun Bonded Filter Cartridges

Maximum Operating Temperature60 ℃(140℉)
Max. Differential Pressure4.0 bar at 20 ℃ (58 psi at 68℉)
2.0 bar at 60℃ (29 psi at 140℉)
1.0 bar at 60℃ (14 psi at 140℉) 
Liquid Flow DirectionOutside to inside
Recommend Change out Differential Pressure2.0 bar (29 psi)



Tech Support
Working Principle of PP Spun Bonded Filter Cartridges
working_principle_pp_filters.jpg

● The drawing is the working principle of layers structure depth pp spun bonded filters

● Layers filtration keep pp spun bonded filters high flow rate, good filtration efficiency and long service life

● Small particles pass the outer layers, then filtered by inner layers wich made of fine fiber and high precision

● Large particles are hold in cottony surface layers of pp spun bonded cartridges which are constructed by coarse fine


Installation of PP Spun Bonded Filter CartridgesInstallation_Absolute_Melt_Blown_Filters.jpg

● Hongtek brand depth pp spun bonded filters used for pre RO water filtration

● After used pp spun filters compare with before used can apparent know the good efficiency filtration

● The central of pp spun bonded cartridges are still no polluted, so that keep liquid clear after filtration

● No fiber drop out, high dirt holding, low pressure drop, high flow rate and high pressure resisting capability

● High quality and reasonable price pp spun filter cartridges increase of longer service life and save much cost


Order Information
CPPIDODMicron RatingLengthEnd CapGasket/O-ring

CPP Series 

PP Spun Bonded Filter Cartridges

with Furry Surface

A = 28mmM = 63mm1 = 1μm5 = 5"D = DOES = Silicone
5 = 5μm9.75 = 9.75"
10 = 10μm9.8 = 9.8"T = 222/Flat(SOE)E = EPDM
25 = 25μm10 = 10"
B = 30mmF = 65mm50 =  50μm20 = 20"O = 222/Fin(SOE)V = Viton
75 = 75μm30 = 30"
100 = 100μm40 = 40"P = 226/Flat(SOE)U = Buna
50 = 50"L = 226/Fin(SOE)

For Example:

CPP-A-F-5-40-D

CPP Series PP Spun Bonded Filter Cartridges - 28mm - 65mm - 5μm - 40" - DOE

Special PP Spun Bonded Filter Cartridges can be customized, such as special ID, OD, end caps etc.