Home Filtration Products News Contact Us
Home >> Filtration Products >> Liquid Filtration >> High Flow Filter Cartridges
HFP Series Pleated High Flow Filter Cartridges Parker MaxGuard Replacement
HFP Series Pleated High Flow Filter Cartridges Parker MaxGuard Replacement HFP Series Pleated High Flow Filter Cartridges Parker MaxGuard Replacement HFP Series Pleated High Flow Filter Cartridges Parker MaxGuard Replacement
HFP Series Pleated High Flow Filter Cartridges Parker MaxGuard Replacement HFP Series Pleated High Flow Filter Cartridges Parker MaxGuard Replacement HFP Series Pleated High Flow Filter Cartridges Parker MaxGuard Replacement

HFP Series Pleated High Flow Filter Cartridges Parker MaxGuard Replacement

Description

HFP Series Pleated High Flow Filter Cartridges provide a cost effective alternative to standard 2.5 inch filter cartridges for high flow applications. High flow filter cartridges have a 6" nominal outside diameter and can handle flow up to 100gpm, signifi cantly reducing the number of cartridge filters required for large flow applications. To replace MaxGuard filter cartridges, pleated high flow filter have standard 226 positive O-ring seal and easy-to grasp integrated handle to reduced labor costs associated with change-out.

Specification
Filter MediaPolypropylene Pleated
Length30", 40"
Outside Diameter6 inch(152mm)
Filtration Rating0.5μm, 1μm, 5μm, 10μm, 20μm
Support/DrainagePolypropylene (PP)
End Cap MaterialPolypropylene (PP), 226 O-Ring/Flat Cap with handle
Seal MaterialEPDM, Buna-N, Viton, Silicone
OutsideNetting


Feature

● "M" pleated enlarge surface filtration area

● Positive 226 O-ring seal assures filtration integrity

● Integrated handle makes change outs fast, easy and safe

● Manufactured with strict quality control for critical filtration

● All filter cartridges constructed with polypropylene are FDA standard


Application

● Waste water

● RO pre-filtration

● Power generation

● Commercial water

● Food and beverage

● Sea water desalination


Performance
Maximum Operating Temperature 176°F (80°C) @ 30psid (2.1bar)
Maximum Differential Pressure70psid (4.8bar) @ 77°F (25°C)
30psid (2.1bar) @ 176°F (80°C)
Suggested Maximum Flow Rate100gpm
Liquid Flow DirectionOutside to inside


Tech Support

Drawing for 40" HFP Series Pleated High Flow Filter Cartridges

Drawing_MaxGuard_filter_cartridges.png

Order Information
HFPMaterialLengthFiltration RatingO-ring Material

HFP Series Pleated

High Flow Filter Cartridges

P = PP Pleated30 = 30"0.5 = 0.5μmE = EPDM
1 = 1μmB = Buna-N
5 = 5μmV = Viton
40 = 40"10 = 10μmS = Silicone
20 = 20μm

For Example:

HFP-P-40-5-E

HFP Series Pleated High Flow Filter Cartridges - PP Pleated - 40" - 5μm - EPDM