ARP Series Horizontal FRP High Flow Multi Cartridge Filter Housing made of glass fiber reinforced plastic material that can be designed to fit 40" and 60" length and OD 6” multi high flow cartridges. The compact housing design not only obtain better flow and footprint ratio, but also with easier maintenance and cartridge replacement procedures. All the main connections for the fluid inlet and outlet designed with flanges, with better sealing performance.
FRP high flow multi filter housing is suitable for scenarios where stainless steel filter housing cannot be used, The FRP housing material has a longer service life when dealing with corrosive liquids such as sea water desalination and brackish water, and effectively solves the problems of corrosion, leakage and degumming of traditional filter housings.
| Housing Media | FRP (Fibre Reinforced Polymer/Plastic) |
| Housing Direction | Horizontal |
| Cartridge Length | 40", 60" |
| Number of Cartridges | 3pcs, 12pcs, 34pcs, 54pcs etc. |
| Installed Filter Type | High Flow Filter Cartridge OD 6" |
| Filtration Rating | 1μm - 100μm |
| Connection | Side Port |
| Inlet/Outlet Type | Flange |
| Inlet/Outlet Size | DN100, DN125, DN150, DN200, DN300, DN500, DN600, DN750 |
| Sealing Type | Flange |
| Seal Material | EPDM, Buna-N, Viton, Silicon |
● Side-in and side-out inlet and outlet design makes it easier to remove the high flow filter cartridges
● FRP multi cartridge filter housing provide strong chemical resistance and outstanding tensile strength
● Horizontal positioning and swing bolt closure simplify installation and maintenance, increase efficiency
● Reduced footprint and height are very suitable for site environment that require special operating space
● All FRP multi high flow cartridge housing are compatible with high flow cartridges in with 6" outer diameter
● FRP multi high flow cartridge housing can be built in 3~54pcs filters to meet various flow capacity requirement
● Water Injection
● RO Pre-filtration
● Sea Water Desalination
● Industrial Water Treatment
● Brackish Water Prefiltration
● Landfill Leachate Treatment
Operation Data for Horizontal FRP High Flow Multi Cartridge Filter Housing
| Working Temperature | 5 - 66°C |
| Max. Pressure | 1 Mpa |
| Connection | Side Port |
| Flow Rate | 40“ 3pcs high flow cartridges: 90 - 150m³/h |
| 40“ 12pcs high flow cartridges: 360 - 600m³/h | |
| 40“ 34pcs high flow cartridges: 1000 - 1700m³/h | |
| 40“ 54pcs high flow cartridges: 1600 - 2700m³/h | |
| 60“ 3pcs high flow cartridges: 150 - 200m³/h | |
| 60“ 12pcs high flow cartridges: 600 - 850m³/h | |
| 60“ 34pcs high flow cartridges: 1700 - 2400m³/h | |
| 60“ 54pcs high flow cartridges: 2700 - 3800m³/h |
Drawing of Horizontal FRP Multi High Flow Cartridge Housing Installed 40" 12pcs Pall Ultipleat High Flow Filters
● Strong dirt holding capacity and high filtration efficiency, longer service life & economical and applicable
● Horizontal FRP multi high flow cartridge housing can be desinged according to the flow rate requirements
● Suitable for corrosive liquids filtration systems that cannot use stainless steel filter housing, reduce investment
● FRP multi high flow cartridge housing is large flow rate, up to 600m3/h, easy to install, replacement and maintain
● FRP multi high flow filter housing is wide chemical compatibility & applicability, compact horizontal design save space
| ARP | Cartridge Length | Round (No. of Cartridges) | Inlet/Outlet Size | O-ring Material |
ARP Series Horizontal FRP High Flow Multi Cartridge Filter Housing | 40 = 40" | 3R = 3pcs | N10 = DN100 | E = EPDM |
| N12 = DN125 | ||||
| 12R = 12pcs | N15 = DN150 | B = Buna-N | ||
| N20 = DN200 | ||||
| 60 = 60" | 34R = 34pcs | N30 = DN300 | V = Viton | |
| N50 = DN500 | ||||
| 54R = 54pcs | N60 = DN600 | S = Silicon | ||
| N75 = DN750 |
For Example:
ARP-40-12R-N30-E
Horizontal FRP High Flow Multi Cartridge Housing - 40" - 12pcs - DN300 - EPDM
Hongtek Filtration Co., Ltd.
Copyright © Hongtek Filtration Co., Ltd. All Rights Reserved | Sitemap
