SRP Series FRP Multi Bag Filter Housing is multiple filter bags installed in one FRP material filter housing, easy and quick to replace. Multi bag filter housing is matched with various specifications of filter bags, mainly used in the pre-filtration system that requires larger flow. FRP multi bag filter housing has simple operation, large filtration area, high filtration efficiency, good sealing performance, long service life and low maintenance cost.
FRP bag filter housing is mainly used in food and beverage, water treatment industry, petrochemical industry, electronics industry, pharmaceutical industry, automobile industry, paint and coating, textile industry water treatment etc.
| Housing Material | FRP(Fibre Reinforced Plastic) |
| Housing Direction | Vertical |
| Bag Size | Size #2( Ø7"× 32") |
| Number of Bags | 3pcs, 4pcs, 5pcs, 6pcs, 7pcs |
| Filtration Rating | 1μm - 1000μm |
| Connection | Side Port |
| Inlet/Outlet Type | Flange, Threaded, Clamp |
| Inlet/Outlet Size | DN100, DN125, DN150, DN200 |
| Sealing Type | Swing Bolt Hinged |
| Seal Material | EPDM, Silicon, Buna-N, Viton |
● Good sealing and large flow rate
● Good filtration effect and long working life
● Small footprint, strong dirt holding capacity
● Low operating cost and wide application range
● No side leakage, easy to clean and maintenance
● Suitable for filter bags of various sizes and materials
● Simple installation and replacement, saving much cost
● Textile Industry
● Paint and Coating
● Food and Beverage
● Electronics Industry
● Automobile Industry
● Petrochemical Industry
● Pharmaceutical Industry
● Water Treatment Industry
Operation Data for FRP Multi Bag Filter Housing
| Max. Temperature | 5 - 66°C |
| Max. Pressure | 1 Mpa |
| Liquid Flow Direction | Side in and side out |
| Flow Rate | 3pcs Size 2: Ø7"× 32" Filter Bags: 90m³/h |
| 4pcs Size 2: Ø7"× 32" Filter Bags: 120m³/h | |
| 5pcs Size 2: Ø7"× 32" Filter Bags: 150m³/h | |
| 6pcs Size 2: Ø7"× 32" Filter Bags: 180m³/h | |
| 7pcs Size 2: Ø7"× 32" Filter Bags: 210m³/h |
Size of FRP Multi Bag Filter Housing
● FRP multi bag filter housing can be made according to the filter bags of various sizes and application
● FRP bag filter housing can be used in the water system which can't use stainless steel bag filter housing
● Multi bag filter housing is large flow rate, high dirt holding capacity, good filtration effect and long working life
FRP Bag Filter Housing Production Lines
| SRP | Bag Dimensions | Round (No. of Bags) | Inlet/Outlet Type | Inlet/Outlet Size | O-ring Material |
SRP Series FRP Multi Bag Filter Housing | S2 = Size #2: Ø7"× 32" | 3R = 3pcs | F = Flange | N100 = DN100 | E = EPDM |
| 4R = 4pcs | N125 = DN125 | S = Silicon | |||
| 5R = 5pcs | T = Threaded | N150 =DN150 | B = Buna-N | ||
| 6R = 6pcs | N200 =DN200 | V = Viton | |||
| 7R = 7pcs | C = Clamp |
For Example:
SRP-S2-3R-T-N125-S
SRP Series FRP Multi Bag Filter Housing - Size #2: Ø7"× 32" - 3pcs - Threaded - DN125 - EPDM
For there are many different round of FRP mutil bag filter housings, please contact our sales team for detailed requirement.
Hongtek Filtration Co., Ltd.
Copyright © Hongtek Filtration Co., Ltd. All Rights Reserved | Sitemap
