MBR30 Series MBR Membrane Module is a highly innovative and cost-effective membrane product with high removal rate of pollutants, strong resistance to sludge expansion, stable and reliable effluent water quality, and no suspended matter in the effluent. PVDF MBR membrane module has simple structure, reasonable design, easy to disassemble, can be backwashed, low operating pressure, save energy. PVDF MBR process greatly strengthens the function of the bioreactor through the membrane separation technology, which greatly increases the concentration of activated sludge, its hydraulic retention time and sludge residence time can be controlled separately. PVDF MBR membrane Module is widely used in municipal, food, textile, petrochemical , steel, electricity and other fields of wastewater treatment.
| Module | MBR30 |
| Element size | 1250x30x2000mm |
| Membrane material | Reinforced Modified PVDF |
| Filter type | Outside-in, Negative Pressure Suction, Continuous Aeration |
| Active membrane area | 30m² |
| ID/OD of hollow fiber | 1.0mm/2.2mm |
| MWCO | 200000 Dalton |
| Filtration rating | 0.1 micron |
| Sealing material | Epoxy Resins + Polyurethane (PU) |
| Material of housing | ABS |
| Connector Size | DN20 |
| Ultrafiltrate turbidity | ≤1NTU |
| Ultrafiltrate SDI | ≤3 |
| Ultrafiltrate TSS | ≤1mg/L |
● PVDF MBR process omits the second precipitation, reduces the floor space and save energy
● Reinforced PVDF MBR membrane is high strength, no peeling, high pressure pulse backwash
● Membrane bioreactor module is easy to integrate, easy to realize automatic control, easy to operate and manage
● The pore size of MBR membranen reaches 0.1μm, MWCO 200000 Dalton, good effluent quality and long working life
● PVDF MBR membrane is hydrophilically modified, the membrane surface is smooth, and the pollution resistance is high
● The component structure of MBR membrane module is simple, the design is reasonable, easy to disassemble & backwashed
● Wastewater reuse
● Domestic sewage treatment
● Municipal sewage treatment
● Reverse osmosis pretreatment
● Industrial wastewater treatment
● Garbage permeable fluid treatment
| Design Flux | Pure Water Flow | 600L/m².h |
| Operating Flux | 10-25L/m².h | |
| Backwashing flux | 30-60L/m².h | |
| Aeration Rate | Frame Projected Area Aeration Rate | 50-100 m³/m².h |
| Feed Condition | Sludge Concentration | <10000mg/L |
| PH | 5-9 (Washing 2-12) | |
| Temperature | 5-45℃ | |
| Operating Pressure | Transmembrane Pressure | ≤ 50 KPa |
| Backwashing Pressure | ≤ 0.1MPa | |
| Maximum Operating Pressure | Negative 50KPa | |
| Suggested Operating Pressure | Negative 10KPa to -30KPa | |
| Cleaning Frequency | Backwashing Frequency | 2-4h |
| Chemical Enhanced Backwash(CEB) | When TMP reaches 50kpa (every 2-4days) | |
| Clean In Place(CIP) | When flux can not be recovered by backwashing & CEB(every 6-12 months) | |
| Operating Mode | 8min. Operation & 2min. Pause or 9min. Operation & 1min. Pause | |
Work principle of reinforced PVDF MBR membrane
● The filtration rarting of MBR membrane is 0.1 micron, particles are trapped by the membrane wall
● MBR module is made of reinforced hollow fiber PVDF membrane, has good mechanical properties
● High quality hollow fiber PVDF MBR membran ensure the stability good quality of produced water
● PVDF MBR membrane has high chemical resistance, good anti-pollution ability and long service life
● PVDF MBR water flow mode is from outside to inside, negative pressure suction, continuous aeration
● Water, small molecules and ions pass through the membrane walls under pressure to form ultrafiltrate
Work principle of reinforced PVDF MBR membrane
● The filtration rarting of MBR membrane is 0.1 micron, particles are trapped by the membrane wall
● MBR module is made of reinforced hollow fiber PVDF membrane, has good mechanical properties
● High quality hollow fiber PVDF MBR membran ensure the stability good quality of produced water
● PVDF MBR membrane has high chemical resistance, good anti-pollution ability and long service life
● PVDF MBR water flow mode is from outside to inside, negative pressure suction, continuous aeration
● Water, small molecules and ions pass through the membrane walls under pressure to form ultrafiltrate
Project Case of MBR30 Membrane Bioreactor PVDF MBR Module
Electroplating Wastewater Treatment(4000m³/d)
Process: Electroplating Wastewater-Physical & Chemical Treatment-Biochemical Treatment-MBR Membrane Module-Discharge Compliance
Equipment parameters: MBR30 MBR Membrane Module, 70pcs/group, 8 groups, 560pcs in total, design operating flux 15L/m².h
Hongtek Filtration Co., Ltd.
Copyright © Hongtek Filtration Co., Ltd. All Rights Reserved | Sitemap
