Home Filtration Products News Contact Us
Home >> Filtration Products >> Liquid Filtration >> High Flow Filter Cartridges
FOM Series High Flow PP Melt Blown Cartridge Filters
FOM Series High Flow PP Melt Blown Cartridge Filters FOM Series High Flow PP Melt Blown Cartridge Filters FOM Series High Flow PP Melt Blown Cartridge Filters
FOM Series High Flow PP Melt Blown Cartridge Filters FOM Series High Flow PP Melt Blown Cartridge Filters FOM Series High Flow PP Melt Blown Cartridge Filters

FOM Series High Flow PP Melt Blown Cartridge Filters

Description

FOM Series High Flow PP Melt Blown Cartridge Filters are made of 100% FDA approved polypropylene, and are manufactured to suit different pore diameter of nozzle-spraying melt blown machines. Large outer diameter of high flow pp melt blown cartridges have multi-layered constructions with fine fibers in inner layers while in outer layers fibers are coarse, which lead to progressive contaminant removal efficiency and consistency of good performance. The high flow pp filters have hard inner PP core, so can bear high water pressure. The surface of high flow pp cartridge filters are orange peel shape, own high dirt holding capacity, low pressure drop, high flow rate, long service life and effective filtration for contaminants and impurities. High flow melt blown cartridges are widely used in prefiltration of sea water and industrial water treatment.

Specification
Filter MediaPolypropylene
Length23”, 40”
End Cap OD147.5mm
ID76mm
Filtration Rating1μm, 5μm, 20μm, 50μm
Internal CorePolypropylene (PP)
End Cap MaterialPolypropylene (PP)
Seal MaterialSilicone, NBR, Viton


Feature

● High flow melt blown cartridges have broad chemical compatibility

● High performance filter media of high flow pp filters comply with FDA

● Widely used in prefiltration of sea water and industrial water treatment

● High filtration efficiency, lower waste disposal costs and more economical

● High dirt holding capacity, low pressure drop, high flow rate and long service life


Application

● Drinking Water

● Petrolchemicals

● Pre RO Filtration

● Food & Beverage

● Water Processing

● General Industrial

● Seawater Pretreatment


Performance
Max Working Temperature80°C
Max Working Pressure 6 bar
Max Differential Pressure Suggested2 bar
Recommended Change-out Differential Pressure1 bar
Suggested Maximum Flow Of Water23inch length: 15 m³/h
40inch length: 28 m³/h
Liquid Flow DirectionOutside to Inside
Typical Surface Area 0.27 m² per 23" melt blown cartridge
0.47 m² per 40" melt blown cartridge


Tech Support

Drawing for FOM Series High Flow PP Melt Blown Filters

drawing-high-flow-melt-blown.jpg


Order Information
CodeLengthMicronFlow l/h¹Filtering surfaceWeight
FOM-PP-23-1-D-S23"1 to 1080000.27 m²2.20kg
FOM-PP-23-5-D-S23"5 to 20150000.27 m²2.20kg
FOM-PP-23-20-D-S23" 20 to 50200000.27 m²2.20kg
FOM-PP-23-50-D-S23"50 to 90250000.27 m²2.20kg
FOM-PP-40-1-D-S40"1 to 10160000.47 m²3.60kg
FOM-PP-40-5-D-S40"5 to 20300000.47 m²3.60kg
FOM-PP-40-20-D-S40" 20 to 50400000.47 m²3.60kg
FOM-PP-40-50-D-S40"50 to 90500000.47 m²3.60kg


FOMMaterialLengthFiltration RatingOpen End TypeO-ring Material

FOM Series High Flow

PP Melt Blown Cartridge Filters

PP = Polypropylene23 = 23"1 = 1μmD = Double O-ringsS = Silicone
5 = 5μmN = NBR
40 = 40"20 = 20μm V = Viton
50 = 50μm


For Example:

FOM-PP-40 -5-D-S

FOM Series High Flow PP Melt Blown Cartridge Filters - Polypropylene - 40"- 5μm - Double O-rings - Silicone