PVF Series Hydrophilic PVDF Membrane Pleated Filters are composed of Hydrophilic polyvinylidene fluoride(PVDF) membrane and advanced polypropylene support components. PVDF pleated filters have thermally welded adaptors, which help the filters be free of additives, binders and lubricants. and high flow rate with long working life. Hydrophilic PVDF membrane pleated filters provide superior filtration efficiency especially when dealing with particle and bacteria. PVDF filter cartridges are with wide chemical compatibility and thermostability, which meet high-purity filtration requirements with exceptional filtration efficiency and reasonable price.
| Filter Media | Hydrophilic PVDF Membrane |
| Length | 5", 9.75", 9.8", 10", 20", 30", 40" |
| Outside Diameter | 2.75"(70mm) |
| Filtration Rating | 0.1μm, 0.2μm, 0.45μm, 0.65μm, 1μm |
| Core | Polypropylene |
| Filter Support | Polypropylene |
| Gasket/O-ring | Silicone, EPDM, Viton, NBR, Teflon encapsulated Viton |
| End Cap/Cage | Polypropylene |
| End Cap Type | DOE, 222/Flat, 222/Fin(Code 3), 226/Flat, 226/Fin(Code 7), 215/Flat, 215/Fin |
● PVDF pleated filters are easy to assemble,and fit for international standard housings
● Large flow rate, high bacteria and particulate removing efficiency and long service life
● Hydrophilic PVDF Membrane Pleated Filters are 100%-integrity & bubble-point tested
● PVDF membrane filters satisfy various chemical processes due to broad chemical compatibility
● High-surface-area design provides excellent flow capacity and consistence of good performance
● Production in advanced clean room and washed by purity water to ensure consistence of good performance
| Inks | Cosmetics | Solvents |
| Semiconductor | Food & Beverage | Chemicals |
| Bottled Water | RO/DI Process | Medinice Filtration |
Operation Data for Hydrophilic PVDF Membrane Pleated Filters
| Maximum Operating Temperature | 100℃(212℉) |
| Max. Differential Pressure | 4.8 bar at 20℃(70 psi at 68℉) |
| 2.1 bar at 100℃(30 psi at 212℉) | |
| Maximum reverse pressure | 40 psid @ 70°F (2.8 bar @ 21°C) |
| Recommended Change Out Differential Pressure | 2.4 bar (35 psid) |
| Sterilization Temperature Time | 121˚C (250˚F) for 30 minutes at 1.0 bar (14 psi), multiple cycles |
Pressure Drop Rate for 10" PVDF Filter Cartridges
End Caps of Hydrophilic PVDF Membrane Pleated Filters
| PVF | Length | Micron Rating | End Cap | Gasket/O-ring |
PVF Series Hydrophilic PVDF Membrane Pleated Filters | 5 = 5" | 0.1 = 0.1μm | A = Double Open End (DOE) | S = Silicone |
| 9.75 = 9.75" | 0.22 = 0.22μm | B = 222/Flat(SOE) | E = EPDM | |
| 9.8 = 9.8" | 0.45 = 0.45μm | C = 222/Fin(SOE) | N = NBR | |
| 10 = 10" | 0.65 = 0.65μm | D = 226//Flat(SOE) | V = Viton | |
| 20 = 20" | F = 226/Fin(SOE) | |||
| 30 = 30" | 1 = 1μm | G = 215/Flat(SOE) | T = Teflon Encapsulated Viton | |
| 40 =40" | H = 215/Fin(SOE) |
For Example:
PVF-20-0.1-H-E
PVF Series Hydrophilic PVDF Membrane Pleated Filters - 20" - 0.1μm - 215/Fin(SOE) - EPDM
Customized Sizes of Hydrophilic PVDF Membrane Pleated Filter Cartridges can be accepted
Hongtek Filtration Co., Ltd.
Copyright © Hongtek Filtration Co., Ltd. All Rights Reserved | Sitemap
